Continuity meter is designed for measuring continuity between rebars in a structure. It uses high current signal to test resistance between rebars. Device has high capacity battery and can be used while charging which ensures that it can be used 24/7.

Function:

For any cathodic protection system to work correctly it firstly has to have good continuity between rebars in the structure. Continuity meter is designed to check continuity between rebars, it shows measurements in Ohms(resistance) and Volts(voltage drop). Device has Large integrated battery for long lasting operation, large LCD screen for easy reading of measurement, simple user interface. Continuity meter applies 1A(10V max) and checks for voltage drop between test points, after that device checks for residual voltage on the test points, if any of these measurements are wrong it will alert the user.

Specifications:

• Rugged water-resistant “Peli Case” construction;

• Auto power-off if not used;

• Large capacity internal battery(10000mAh);

• No external charger, simple 100-240VAC input;

• Supports SD card for every measurement recording (with integrated Real-Time-Clock);

• One button calibration, for test leads resistance;

• Auto mode for touch free operation (device takes measurement every time test leads are connected to rebars);

• Robust test leads connectors;

• Included robust test leads;